The WAVLINK WiFi extender setup is a simple and effective solution for extending your wireless network coverage. With easy setup and user-friendly features, this device enhances your WiFi signal, eliminating dead zones and ensuring a strong and reliable connection throughout your home or office. Its compact design allows for convenient placement, and it works seamlessly with your existing router. Enjoy improved internet speeds and connectivity with the WAVLINK WiFi extender, making it a practical choice for anyone looking to boost their wireless network effortlessly.

How do I set up the WAVLINK WiFi range extender?

The WAVLINK WiFi range extender setup using a manual method is a straightforward process. Here are seven easy steps to guide you through the setup:

  • Connect your WAVLINK WiFi extender to a power source and wait for it to power up. Make sure it’s placed within the range of your existing WiFi network.
  • Use a WiFi-enabled device (like a smartphone or laptop) and connect to the default WiFi network named “WAVLINK-N” or something similar.
  • Launch a web browser (such as Chrome, Firefox, or Safari) on the connected device.
  • In the address bar of your web browser, enter the default IP address for the WAVLINK extender. This is usually “” or a similar address.
  • Enter the default username and password for the WAVLINK extender. You can find this information in the user manual or on the device itself.
  • Follow the on-screen instructions to configure your WiFi extender settings. You’ll typically select your existing WiFi network and enter the network password to establish a connection.
  • After entering the required information, save the settings. The extender will reboot, and once it’s back online, you should have an extended WiFi network with improved coverage.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap setup.

How do I do wavlink WiFi extender setup using the Wps method?

  • Using the WPS method to set up your WAVLINK WiFi extender is easy and only requires seven steps
  •  Turn on the extender first, then move it into the range of your WiFi network. Secondly, find the extender’s WPS button.
  •  Third, make the extender’s WPS LED blink by pressing the WPS button on it.
  •  Fourth, push your WiFi router’s WPS button within the next two minutes.
  •  Fifth, watch for the extender’s steady WPS LED to turn on, which indicates a successful connection.
  •  Sixth, use LED indicators to verify a steady connection.
  •  Seventh, use the extender’s IP address to access its settings and make more customizations if necessary. Your WAVLINK extender will be operational and able to expand your WiFi coverage with ease after following these seven simple steps.

WAVLINK WiFi range extender firmware update.?

  • Log in to the web interface of your WAVLINK extender using a web browser. 
  •  Locate the firmware updates available for your extender model. Download the latest firmware version to your computer.
  • If the firmware is compressed, extract the contents of the downloaded file to a folder on your computerEnsure that your computer is connected to the WAVLINK extender either:
  • Return to the web interface of your WAVLINK extender in the browsThis is where you’ll upload the new firmware file.
  • Browse your computer to select the downloaded firmware file, theer. Look for a section related to firmware or system updates.
  • After the firmware update is complete, the extender may automatically reboot. If not, consider manually restarting the extender.
  • Log back into the extender’s web interface and check the settings to confirm that the firmware has been updated to the latest version.

What is the login process for my Wavlink  extender setup?

  • Ensure that your Wavlink AC1200 extender is powered on and connected to your network. You can do this by connecting your computer or mobile device to the extender’s WiFi network.
  • Launch a web browser on your connected device. This can be Chrome, Firefox, Safari, or any other browser you prefer.
  • In the address bar of the web browser, type the default IP address for the Wavlink extender. The common default IP address is “” but check your extender’s manual for confirmation.
  • A login page will appear. Enter the default username and password for your Wavlink  extender. You can find this information in the user manual or on a label on the extender itself.

After entering the correct login credentials, press Enter. You should now have access to the extender’s settings.

How do I reset on my Wavlink wifi extender?

  1. Find the reset button on your Wavlink WiFi extender. This button is typically small and may be recessed to prevent accidental presses
  2. Use a paperclip or a pen to press and hold the reset button. Hold the button down for about 10-15 seconds.
  3. While holding down the reset button, pay attention to any LED indicators on the extender. These indicators may change during the reset process.
  4. After holding down the reset button for the specified time, release it.
  5. Allow the Wavlink extender a few minutes to reboot and restore its factory default settings. During this time, the LED indicators may go through a series of changes.
  6. Once the extender has completed the reset process and is back online, you can connect to its default WiFi network using the information provided in the user manual.
  7. Open a web browser and enter the default IP address of the Wavlink extender to access the setup page. You may need to use the default login credentials unless you’ve previously changed them.